chevron_left Back

PixScan™

how-to image

1.

Place the photo or image you want to cut out on your PixScan™ mat. Press down so that your image is stuck securely to the mat. Take a picture using your smartphone or scan in your PixScan™ mat.

2.

Tip: For optimal results, when photographing or scanning the PixScan™ mat, ensure that no zoom is used, your lighting is even, the entire mat is clearly visible in the image, the PixScan™ mat is flat, and the cut media is contained within the black cut border.

how-to image

3.

Click on the PixScan™ icon in the Silhouette Studio®. Select “Import from File” or “Import from Scanner.” A window will pop up for you to navigate. Select your image and click “Open.”

4.

Tip: If you see a message that says you need a calibration profile, click “Show Calibration Test Card,” choose your printer size, and print the page. Take a picture of the printed calibration page from a bird’s-eye view and ensure that the calibration dots fill the entire image. Do not put the page onto the PixScan™ mat. The image should include only the dots. Save your image to your computer. Click the plus (+) icon under the Camera Calibration section of the PixScan™ panel. A window will pop up. Select your calibration image and click “Open.” After that, PixScan™ is calibrated for your camera. You only have to do this once per camera.

how-to image

5.

Once you have your PixScan™ image loaded, you are ready to create or place your cut lines. Trace your image or manually add cut lines where you want your machine to cut. Delete any excess cut lines that you do not need. You also can add an offset line to your design.

how-to image

6.

Choose your cut settings according to the material on your mat.

how-to image

7.

Send your project to your Silhouette machine and watch the magic happen.

how-to image

8.

And that’s it! It’s super easy to cut whatever you want with the PixScan™ feature. Use it to cut photos, drawings, cardstock, or whatever else you can think of!